PHOTOVOLTAIC RELAY

SPV40 시리즈 태양광 릴레이

SPV40

제품 특징

Two sets of main contacts + one set of auxiliary contacts
When the main contacts are stuck, the auxiliary contacts shallfulfill the safety detection function (lEC 6181 0-3).
Main contact gap> 3.6 mm, auxiliarycontact gap>0.7 mm
Suitable for inverters used in solar photovoltaic power generation and Ac charging stations.
The coil holding voltage can be reduced to 50-60% of the coil's rated voltage to achieve energy-saving benefits.

SPECIFICATIONS

Contact arrangement: 2 Form A ,1 Form B
Contact material: AgSn02
Contact resistance: Main contact: 10mQMax(@6VDC 20A) Auxiliary contact:100mΩMax(@6VDC1A)
Rated load (Resistive): 480VAC 40A
Max.Switching Voltage: 480VAC
Max.Switching Curre nt: 40A
Max.Switching Power: 19,200VA
Min.load: 6VDC100mA
Operate time(at rated.volt.): s30ms
Release time(atrated.volt.): s10ms
Environmental requirements:: Complies with RoHS, ELV, and REACHregulations
Insulation Resistance: 1000MΩ Min(500vDC)
Dielectric strength: Between open main contacts · 2000VAC，50/60Hz 1min.
Between main contact and auxiliary contact: 5000VAC，50/60Hz 1min.
Between main contact sets: 2000VAC，50/60Hz 1min.
Between auxiliary contact and coil: 5000VAC，50/60Hz 1min.
Between main contact and coil: 2000VAC，50/60Hz 1min.
Between disconnected auxiliary contact: 1000VAC，50/60Hz 1min.
Temperature rise: <70K(After the coil is energized with rated voltage for 100ms,set the holding voltage to 60% of rated voltage, load current carrying 40A, @85°C)
Shock resistance: Destructive 100G Min
Vibration resistance: Destructive 10~55Hz1.5mm DA
Te mperaturerise: <70K(Afterenergizing the coil at rated voltage for200ms,set the holding voltageto 60% of rated voltage,load current 40A, @85°C)
Mechanical endurance: 1x106OPS
Ambient temperature: -40℃C~85℃C(NoCondensation)
Humidity: 5% ~ 85%RH
Termination: PCB
Unit weight: Approx.65g